1 The dashboard under repair. Almost finished. Note the trip reset hanging down.
2 The broken direction indicator switch, unsupported microphone and removed heater switch knob. Ashtray and passenger foam protection strip removed to start the repairs.
3 The passenger side safety strip removed
4 The indicator switch showing moulded actuator sheared off
5 more of same
6 The first stage of the steering wheel removal
7
8 Close up of the broken switch, dismantling of the switch nacelle begun
9 The padded shelf over the dashboard removed
10 The dashboad levered forward to give access to the two bolts behind that retain the nacelle
11 The dashboard brought forward to allow access to the nacelle fixings
12 The steering wheel removed to permit removal of the nacelle
13 The nacelle pulled forward to show broken switch. The speedo unscrewed and the fuel gauge removed. Burned out insulation revealed (no fuses fitted!)
14 The indicator switch replaced
15 The manual screen washer pump removed from the nacelle
16 The location of the microphone (unglued) and the heating distribution drum. Broken cover to nav. light is historic
17 The fuel gauge removed for testing
18 The speedo cable attached for refitting
19 The nacelle ready for retightening the choke cable
20 Ready to replace the nacelle
21 Nacelle attached after indicator switch and speedo replacement. Electrics tested
22 Under the dashboard the cover plate for the heater duct that also carries trip meter reset, awaits refitting
